 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com This specification covers the characteristics and specifications of SAW filters for parts ACTF139/139.0/1F11, ACTF147/147.0/F11, ACTF155/155.0F11, ACTF163/163.0/F11, ACTF171/ 171.0/F11 and ACTF280/280.0/F11 which are designed for use in pager applications. 1.Package Dimension (F-11) Pin 1 4 2/3 Dimensions A B C D E F Configuration Terminal 1 Terminal 2 Case Ground Data (unit: mm) 11.00.3 4.50.3 3.10.1 0.450.2 6.00.5 2.540.2 2.Test Circuits In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 1 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 3.Performance 3-1.Maximum Ratings Rating DC Voltage AC Voltage Operation temperature Storage temperature RF Power Dissipation VDC VPP Value +15 V Max. 10V50Hz/60Hz -4 C to +85 C -45 C to +85 C 0 dBm 3-2.Electrical characteristics Operating temperature Range: -10 C to +50 C Part number Nominal centre frequency Insertion Loss fC -100.0MHz to fC -46.8MHz fC - 46.8MHz to fC -38.8MHz f C4.0MHz fC + 38.8MHz to 2.5xf C Input/Output Impedance 50 min. 50 min. 6.5 max. 42 min. 210//-13.3 50 min. 50 min. 6.5 max. 42 min. 210//-12.1 50 min. 50 min. 6.5 max. 42 min. 210//-12.3 50 min. 50 min. 6.5 max. 42 min. 210//-11.0 50 min. 50 min. 6.5 max. 42 min. 210//-10.9 dB dB dB dB //pF F139 139.0 F147 147.0 F155 155.0 F163 163.0 F171 171.0 Unit MHz Part number Centre Frequency Insertion Loss 277.9MHz .... 284.1MHz Amplitude ripple 277.9MHz .... 284.1MHz Attenuation fC -100.0MHz .... f C fC -39.5MHz F280 281.0 4.5 max. 1.5 max. 48 max. 40 max. 150 Unit MHz dB dB dB dB -39.5MHz .... fC -100.0MHz Input/Output Impedance In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 2 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4.Typical Frequency Response In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 3 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 4 OF 4 |
Price & Availability of ACTF13913901F11
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |